2023 DV DVR Camera Full 1080P Mini Car Dash Cam IR Night Vision US SQ11

Features ●High quality image HD FULL HD 1080P DV DC●Imported HD lens●Small form factor design, portable handheld DV DC●High-definition video recording in low light●Video format is: 1280×720P●Video format is: 1920×1080P●Photo mode is: 12M (4032 × 3024)● Motion detection recording: 720P and 1080P●High-speed transmission USB 2.0 interface●Maximum support for 32G no T-flash card●Support TV-OUT connection TV surveillance video● Built-in lithium battery for up to 100 minutes Operation guide Charging:This unit has a built-in rechargeable lithium battery. When using the unit for the first time, please chargeit first. You can charge it in the following ways:1 Connect the computer to charge and connect to the computer using USB;2 Recording while charging, you can record or charge (external USB 5V charger or mobile power)3 When charging, the red light flashes blue and the blue light does not light. When the red light is full,the blue light does not light up. (After the red light is on, please charge it for another 30 minutes toensure that the battery is 100% full).Note:1 When the battery is low, when the TF card is full, the DV red and blue lights flash for 5 secondsand then directly shut down to enter the protection state.(The recording file is saved and automatically turned off), please charge the unit at this time.2 No card at boot, the red and blue lights will automatically shut down after 5 seconds of flashing.3 There is no working mode after power on, and it will automatically shut down in 1 minute.One line and three use:The USB cable TV line is combined into one line and has the following three functions.1 You can plug in the computer to charge the unit and transfer data.2 You can insert the TV OUT screen display.3 You can externally insert the DV-5V while charging.720P video does not flash:Click the ON OFF button to turn it on, the blue light will be on for the standby mode, click the switchbutton once, the blue light flashes 3 times and then enters the 720P video. During the recording process,the light does not prompt, and the 5 minute segment automatically saves continuously. Recording, loopcoverage, press the switch button once to stop recording, return to the blue light blue light long standbymode.1080P video does not flash:Turn on the blue light and turn on the standby mode. Press the mode button once, the red and blue lightswill be on for 1080P recording mode, and then press the switch button once. The blue light will be on andoff and flash off three times to enter the 1080P video. During the process, the light does not prompt, andthe continuous recording is automatically segmented for 5 minutes, and the loop is overwritten. Then pressthe switch button once to stop recording and return to the standby mode.Take 12 million photos:In the standby mode, press the mode button 2 times, the red light is long, the blue light is not bright.)Press the power button once again, the red light flashes 1 time, 1 picture is taken, 12 million pixels (4032×3024) is automatically saved.Infrared light on and off:On: In any mode of power-on standby, press and hold the ON/OFF button for 2 seconds or so, the red lightflashes 2 times, and the infrared night vision light is turned on to enable night-vision video recording.Off: Turn off the infrared night vision light. In any standby mode, press and hold the ON/OFF button forabout 2 seconds, the red light flashes 3 times, and the infrared night vision function is turned off.Motion detection mode (720P - 1080P):720P motion detection: In the blue light standby mode, press and hold the mode button for 3 seconds, theblue light is on and the red light flashes 3 times, then the light is turned off and the motion detectionrecording mode is enabled. After detecting the moving of the object, the red and blue lights At the sametime, it flashes to 720P motion detection video, 5 minutes, automatically packaged and saved, loop coverage,no object movement until standby until no power or TF card is full. (Press any button once to exit motiondetection mode).1080P motion detection: In the red and blue light long 1080P recording mode, long press mode button 3seconds red light flashes 3 times, blue light long red light flashes 3 times, then both motion detectionrecording mode is enabled, detected After the object moves, the red and blue lights flash simultaneously to1080P motion detection recording, 5 minutes, automatically packaged and saved, loop coverage, no objectmovement until standby until no power or TF card is full. (Press any button once to exit motion detectionmode).Recording while filling:Insert the TF card, externally plug into the USB-TV cable, external 5V USB power supply or charging treasure(mobile power) machine directly into the 720P camera mode, without manual stop until the card is full or nopower, you can also manually stop recording to switch to Any mode.TV OUT mode:Connect the USB-TV cable, and connect to the TV screen to see the image through the TV screen. At this time,you can take photos, videos, and motion detection.Reset:The machine crashes, the button is invalid, and it can't be used normally. You can use the sharp object toinsert the click button on the reset hole button to reset the machine. After reset, it can be used normally.Shutdown:In the stop (video, photo, motion detection) function mode, you need to turn off the phone, press and holdthe ON/OFF button for about 6 seconds, and see that the red and blue lights are all off. In the standby modewithout any function, the standby automatically shuts down for 1 minute.Modify settings at your own time:After the machine is powered on, it will automatically create a TXT text file in the root directory of theTF card (as shown in the figure). Shut down the data cable to connect to the computer. After opening theTIMEREST.txt text file on the removable disk, edit the time required by itself, such as the format ( Year,month, day, minute, and second) 20160804174726 Y After saving the text file, you can record the video atstartup, and the edited time will be displayed on the video save file. The same operation mode is notrequired for the time watermark, mainly the letter difference between the tail Y and N. The reference formatis as follows:1: 20150608192526 Y (with time watermark display)2: 20150608192526 N (no time watermark display)Note:1 Make sure that the T-flash (Micro SD) card is inserted in the product. If the card is not inserted, themachine's red and blue lights will not work properly.2 In a well-lit environment, aim the lens at the subject and keep it at a distance of 50cm or more from thesubject. This will result in an image with correct color, natural scenery, clear picture and stable picture.Connect to a computer:In the boot, standby and power off state, you can directly connect to the computer. After connecting to thecomputer, you can use it as a USB flash drive. You can freely copy files, cut and paste, delete and formatthe USB flash drive.Connect the machine to the computer's USB port. After a few seconds, the computer will pop up the removabledisk logo. The blue light will recognize that the USB device can transmit data. The red light flashes forcharging, and the red light is long for charging.Prompt:1 After the unit is connected to the computer, if the computer does not recognize it, or if the removabledisk does not eject after 30 seconds, reset and re-plug it once.2 It is recommended to use the TF card reader to directly read the video file for playback, and directlyplay the video file stored in the built-in memory of the machine through the USB connection. The data may betoo large and the transmission cannot keep up, which may result in poor playback.Related parametersRemarks: Recharge after each use of the battery, it takes about 2 to 3 hours to fully charge, and theindicator light is full.Charge as much as possible for 30 minutes to ensure that the battery is fully charged.Because this product is a true HD high-definition DV, the power consumption current of the product is largerthan that of Puqing, and the shell material is made of zinc alloy.It may be normal for the product to have some heat during use. Please do not worry about the product beingdefective. It is shipped after long-term testing and aging to ensure that the product has no quality problems. Package Included: 1 x Mini Car DVR Camera （Black）1 x USB/TV Out 2-in-1 Cable1 x User Manual1 x Retail Box 1 x Bracket1 x Clip